Hollow Porotherm Bricks-A Worthy Choice

The term “Hollow” or “Holes” have an interesting tendency to make many visualize something which is delicate, permeable, weak, flimsy and prone to destruction. Something certainly not easily acceptable on the walls of your home! True, but when it comes to Porotherm bricks with perforations being an integral element of their design, being “hollow” is not so bad after all. Easier said than to believe… So allow me to be more explicit.

The two most prominent features of Porotherm bricks:

Made of clay, 100% natural
With Perforations (Horizontal perforations for non-load bearing and Vertical Perforations for load bearing)

Horizontal (Porotherm HP) Non load bearing

Vertical (Porotherm VP) Load bearing

Now both the above features help in a variety of ways, the most important being improving thermal insulation for your home interiors…

Clay, being a breathable material, improves thermal comfort, making the substance a good insulator. A common example would be earthen pots used in olden times and are still in vogue in rural areas, to store water. Places where mid-day temperatures go soaring high, you‘ll be surprised to discover, when someone offers you a glass of water from an earthen clay pot, the water would be relatively much cooler…something you will not find if you drink from a plastic bottle or from tap water which is supplied via water tank kept on the roof of the building. The direct heat from the sun is absorbed by the container, transferring the heat to the stored water inside. Clay, as a substance, has an innate ability to restrict conduction.

Another common example would be the clay lamps or traditional Indian ‘Diyas’ which are used during festivities all across India. If you hold a burning Diya, your palm will not feel the heat from the lighted lamp. Hence, when clay based walling material, like Porotherm, is used, the same principle applies, where in the outside heat gets blocked by the substance.

Now, I believe, to convince you about the thermal property of clay and the benefits of Porotherm brick walls made of clay should not be that challenging. However, one may ask, what is the use of having perforations in the bricks? If it is already made of clay, then thermal insulation will happen any ways to some degree, why put the holes? Very pertinent question…

The holes have been consciously introduced to further enhance the product’s thermal insulating capacity and to decrease the weight of the product, thereby reducing the overall structural load / dead load on the building. I will come to the weight part shortly. Let’s now concentrate on the thermal insulation aspect of Porotherm bricks…

For this, let us have an understanding of how a building gets heated up in the first place…

Heat can pass through walls, roofing, windows and doors, the floor and even through your framework.

Heat entering the home comes mainly through the ceiling (25-35%) but windows account for just as much heat gain (25-35%) and walls also play a larger role (15-25%), as all are directly exposed to the sun. Hot winds blowing through as draughts can also contribute to heat entering your home (5-15%). Using Porotherm bricks for insulation helps to control how much heat is allowed through the walls.

When it’s warm outside, non-insulated walls and windows become warmer on the inside.

Result: More energy is required to replace the heat lost cooling the inside of the walls and windows.

The voids or perforations in the Porotherm bricks will help in trapping air space within the holes. Air is a bad conductor of heat and hence will slow the migration of heat energy and help maintain the indoor temperature.

Using Porotherm brick, a slightly modified version of Porotherm HP, which has rock wool filled in the porous gaps, help to further absorb heat. The individual fibres conduct heat very well, when pressed into rolls and sheets, their ability to partition air makes them excellent heat insulators and sound absorbers

When sunlight enters an air-conditioned room through a single pane window, heat energy is generated in the room.

Result: The air conditioning system must run longer and work harder to overcome the heat gained through the window.

Hence, even if the air conditioning is working, huge amount of energy is required to bring down the temperature inside leading to exaggerated power/ utility bills. Moreover, power shortage becoming a more and more perennial problem these days in all major cities in India, having a state of the art split Air Conditioning system from the best Korean brand may not be of much help. Hence it is always best to seek a natural, healthy, and energy saving alternative.

According to buy neurontin overnight delivery Heimo Scheuch, CEO, Wienerberger, “While ‘Thermo Brick’ eliminates the need for thicker walls and helps increase the carpet area, it works magic for providing thermal insulation and providing comfortable indoor temperatures.”

So next time you see bricks with holes being used on a construction site, you’ll know all about its benefits and utility and hopefully be less sceptical.

Now, to come back to the point about holes, making the bricks light weight, as discussed initially. By incorporating the perforations in the design of Porotherm bricks, less usage of resource compared to a solid brick, has transformed a clay block like Porotherm bricks into a Resource Efficient Brick. The resource required for the surface area has been reduced due to the presence of the voids, which has in turn reduced the overall weight of the brick by almost 60% compared to a solid concrete block.

“Hollow clay blocks are earthy, season sensible, practical to work with and bring down your construction cost by more than 15 per cent” says buy Quetiapine without a prescription online Architect Krishna Rao Jaisim (of Jaisim Fountainhead and Chairman, Indian Institute of Architects, Karnataka Chapter), who is a champion green architecture promoter in South India.

The benefits of the block being light weight are aplenty. By being light weight Porotherm bricks is by no means a weak product. On the contrary, the compressive strength of Porotherm bricks is-

Donghai ≥3.5 N/M, which adheres to the Baardheere IS 3952 standard. The light weight property of the porotherm bricks also helps to reduce the dead load of the building.

A building structure has mainly two types of load:

Dead Load : Which include the non-movable loads on the building like the weight of the walls, doors, windows, floor tiles etc…In other word the dead load includes loads that are relatively constant over time, including the weight of the structure itself, and immovable fixtures such as walls, plasterboard or carpet. The roof is also a dead load. Dead loads are also known as permanent loads.

Live Loads: All movable loads like peoples, furniture, etc., basically any load that can be moved from one place to another.

The dead loads constitute the maximum load that the structure of the building take, and hence if this load can be reduced, then a substantial reduction in the consumption of steel and concrete used for the foundation and columns, can be achieved. This would be a huge saving opportunity for the developer or builder or even an individual house owner.

Other advantages of porotherm bricks include:

Highly Durable: The porotherm brick is 100% natural, made of clay burnt in 900◦C to 1000◦C, making the brick durable & long lasting
Low Maintenance
Load Bearing, strength can be specified as per the requirement
Fire Resistant
Economical
Environment Friendly; Coal ash, granite slurry and rice husks (All by products of other industries) are used as raw material
It is a faster and easier construction system, when compared to the other conventional construction systems.
Increased carpet area
Assured Quality: – Fully automated, state of the art, manufacturing unit in Kunigal, Karnataka
Better sound absorption: – Being hollow in nature.
Reduced thickness of plaster: – Due to size accuracy & less cement consumption due to fewer joints
Easy installation of appliances & fixtures